EPlus-3D launches EP-M1550 metallic L-PBF system with 16 lasers


Keep updated with all the pieces that’s taking place within the great world of AM by way of our LinkedIn group.

In a contest for {hardware} measurement, capabilities, productiveness (and big services) that has actually taken on in China, EPlus-3D, one of many main Asian (and international) producers of polymer and metallic L-PBF programs, is launching the brand new EP-M1550, which is probably going going to be (on the time of launch) the biggest commercially obtainable metallic L-PBF system on this planet.

The brand new system implements an progressive four-matrix sixteen-laser sixteen-galvanometer configuration (however might be custom-made to 25 lasers). Its XY path internet form format measures 1550 X 1550mm and the Z path internet form reaches 1000 mm (however might be custom-made as much as 2000 mm). Whereas SLM Options delivers on its plans with the brand new Adira expertise, not many metallic AM – particularly PBF – machines are going to have the ability to compete.

The machine helps varied metallic powders equivalent to titanium alloy, aluminum alloy, chrome steel, high-temperature alloys, die metal, cobalt-chromium alloys, and so forth. In line with the corporate, the machine’s printing velocity can attain as much as 540cm³/h, which is appropriate for direct manufacturing of high-performance parts within the aerospace discipline. That is achieved by way of the sixteen lasers working synchronously.

EPlus-3D additionally says that the EP-M1550 additive manufacturing system has been properly obtained by the primary clients. It’s deliberate to be totally rolled out to clients in September.

EPlus 3D launches EP-M1550 metal L-PBF system with 16 lasefrs, with a build volume of 1550 x 1550 x 1000 mm. It will be shown at TCT Asia

In line with E-Plus-3D, the EP-M1550 is the results of impartial analysis and growth, in addition to the design of additive manufacturing expertise. It contains a distinctive and progressive design in optical system calibration, wind discipline system debugging, powder spreading system management, and mechanical and electrical management programs, which may successfully assure lap joints. Space splicing accuracy management makes full-format printing constant.

The laser beam high quality of the EP-M1550 can also be stated to be excessive (M 2 ≤ 1.1); the sunshine supply is steady and the spot diameter is small. Multi-laser optical path and performance consistency are reportedly very steady, and forming accuracy is assured. Moreover, the positioning of the substrate is correct and the set up is fast and handy. The substrate is simple to regulate and may successfully make sure the accuracy of the printing space;

The precision of the laser printing splicing space is excessive, the deviation of the ability worth of the laser radiation to the processing airplane is controllable, the deviation of the spot diameter of the beam centered on the processing airplane is controllable, and the place deviation between the focal airplane and the processing airplane is controllable. The self-developed software program precisely plans the laser scanning path to make sure uniformity of shaped elements.

EPlus 3D launches EP-M1550 metal L-PBF system with 16 lasefrs, with a build volume of 1550 x 1550 x 1000 mm. It will be shown at TCT Asia

The precise measurement of the printing chamber is 1558 x 1558 x 1100 mm with a construct quantity of two,670 liters. Because the Z-direction peak might be custom-made to be as excessive as 2,000 mm, and the utmost construct quantity might be bigger than 4,854 liters, which considerably expands the applying eventualities for internet form metallic additive manufacturing expertise. The machine can print constantly for a very long time, and E-Plus-3D says mechanical properties are steady and controllable, with a density of the metallic printed elements higher than 99.9%. Layer thicknesses are adjustable and layers can vary from 20 μm to 120 μm. The printing layer thickness might be successfully adjusted in keeping with the complexity, topology optimization diploma, internal cavity wall thickness and different half traits to enhance the printing velocity.

In an effort to make 3D printing transfer in the direction of direct manufacturing, the {hardware} producer can also be implementing a number of options to make operating the machine extra intuitive and consumer pleasant. EPlus-3D management software program can full your complete management course of from knowledge to elements processing and molding. The software program independently develops the EPHatch printing course of planning software program, which may optimize the efficient printing path for the sliced ​​knowledge.

The ultimate and totally operational EP -M1550 additive manufacturing system printing elements shall be exhibited for the primary time at TCT Asia 2023 in Shanghai.

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest Articles