The precise bulbs are S14 LED Bulbs. At first look, we although the bulbs are made up of glass. However fortunately, they don’t seem to be. They’re made up of very rugged and shatterproof plastic. Internally, there’s a single line of LED within the bulb.
On the entrance of the photo voltaic panel module, now we have, nicely, the photo voltaic panel. On the again, there are a few buttons with labels “ON/OFF” and “MODE”. Nonetheless on the again aspect, there’s a mounting level the place you’ll be able to screw the wall holder half. Simply beside the 2 buttons, there’s a flap masking the USB-C port.
There are 10 buttons on the useful distant management. On high, now we have the primary energy on and off buttons. Just under that, now we have the mode choice button. Utilizing this button, you’ll be able to set the mode between respiratory, flashing, and fixed gentle. Then now we have the three brightness choice buttons: Vivid, Tremendous Vivid, and Smooth.
Lastly, now we have 4 timer-related buttons utilizing which you’ll be able to set the off timer. The accessible timings are: 2H, 4H, 6H, and 8H.
Putting in the Addlon Photo voltaic String Lights may be very straightforward. As all of the LED Bulbs are already hooked up in a string format, simply unwrap the string and place/repair/connect them the place ever you want. Every socket has a small gap on the highest in an effort to tie them down utilizing cable ties. In our case, we wrapped the string lights alongside a stair case.
Earlier than continuing with set up, be sure that all of the LED Bulbs are correctly screwed into their sockets. In our case, among the bulbs had been partially screwed. Even the producer recommend to tightly screw all of the bulbs within the string.
Select a spot to mount the photo voltaic panel module. You possibly can both repair it on a wall or insert it within the floor in your backyard. In our case, we selected to insert the photo voltaic panel module within the floor on the backside of the stair case. That is the place the place we get most solar gentle throughout day time.
We first drained the photo voltaic panel module fully by operating the string lights in full brightness mode. It took virtually 5 hours to totally drain the module. After that, we recharged the module utilizing a daily USB adapter with USB-C Cable. It took barely over 4 hours to totally cost the 5,000mAh battery within the module from within the USB Mode.
After this, we set the brightness to “Smooth” and left the lights on to see how lengthy does the photo voltaic panel module final. Despite the fact that the producer claims greater than 20 hours of backup when the brightness is ready to delicate, we obtained simply over 18 hours. Whereas this isn’t an entire setback, we want the battery lasted the complete 20 hours as claimed by the producer.
