How To: Paint a 3D Printed Cube Tower

Video games are available all totally different styles and sizes – there are board video games, card video games, tile video games, role-playing video games and all the pieces in between. One factor most of them have in widespread are cube. Rolling cube comes with some widespread unintentional hazards – they knock over items on the sport board, they fall on the ground, they roll underneath the fridge, and so they get eaten by the household pet. However with the Cube Tower, these issues are a factor of the previous!

This text will present you learn how to paint a 3D printed cube tower – the mannequin we chosen was designed by NIXA and uploaded to the Zortrax library right here.

The unique mannequin for the 3D tower was based mostly on an actual water tower in Olsztyn, Poland inbuilt 1897 (it’s now a planetarium, and is within the metropolis the place the headquarters of Zortrax is positioned). The precise tower is fabricated from masonry and reddish, rusted brick, however I’ll end this print with an superior, stony, dungeony paint job. In fact, be at liberty to complete the tower nevertheless you want; as a result of our household performs Settlers of Catan rather a lot, I needed to go for the medieval fortress really feel.

3D Printing the Cube Tower

First, we have to get our 3D printer prepared. Whereas there are numerous choices for ending the print, I went with little or no sanding because the print decision was excessive and the small print got here out nice!

The mannequin was printed on an Ultimaker 2 printer. Listed here are the settings:

I printed 2 variations – one in clear orange PLA 3D filament and one other in silver/gray ABS filament. Whereas each turned out rather well, I went with the clear orange mannequin – you will see out why later within the tutorial! =)

Take a look at our guides to printing with each of those supplies right here:

Easy methods to Succeed when Printing with PLA:

http://www.matterhackers.com/articles/how-to-succeed-when-printing-in-pla

Easy methods to Succeed when Printing with ABS:

http://www.matterhackers.com/articles/how-to-succeed-when-printing-with-abs

Portray the 3D Printed Cube Tower

As soon as you’re happy with the feel of the print utilizing your post-processing technique of alternative, it’s time to color! Listed here are two footage that gave me inspiration for the kind of colour and design I used to be on the lookout for:

For the gothic, medieval look on the tower, we undoubtedly need loads of stone particulars and put on and tear to face out, together with smaller particulars across the door, on the steps and the highest parapet of the tower, so as to add realism and likewise to not make all of it one colour – booooorrrrring!

For the stone look, I took a multimedia method. As a result of the feel was so clean on the print, and there wasn’t an correct, sensible technique to carve or etch the mortar traces into the tower, I made a decision to construct it up as an alternative. I bought foam, double-sided stickers in varied sq. shapes from my native craft retailer – they’re usually utilized in scrapbooking to layer paper cutouts.

Within the first image, you may see the preliminary phases of making use of the cutouts across the home windows and the way I organized the stickers away from the home windows. Getting the home windows dialed in ought to occur first – you may all the time reduce out the froth to slot in the nooks and crannies after that.

Within the second image, I’ve completed making use of the froth and have eliminated the adhesive backing.

I used two sizes for a wide range of the kinds of ‘stone blocks’ on the tower, so it’s not all one dimension (once more, boooorrrrrring!). Additionally they have an amazing mini-stone texture to them, which can assist make the paint job actually pop – double win! The one reducing of the blocks I wanted to do was to trim items that have been too massive, and to bevel the blocks above the home windows – they wanted an angle reduce so they might interlock and look nicer. However I’ll say, it took rather a lot longer than I initially anticipated! Additionally, I obtained just a little lazy with the larger foam squares on the underside – usually I’d reduce them to suit and apply them at totally different angles – however Christmas was coming!

I’d undoubtedly recommend NOT eradicating the backing on the skin of the froth till you’re utterly completed making use of them; as I used to be making use of extra, my hand stored getting caught to them, and a few pulled off.

For the portray, this can be very essential to get a darkish base layer down; this offers you a basis for the acrylics to stay to, in addition to a filler for all of the cracks and crevices on the print. A darkish colour in these areas provides the phantasm of extra depth and makes your foam squares actually pop. I used a matte black spray paint – nothing fancy, however undoubtedly take the time to get your entire print lined; it’ll most probably take at the least two coats to get full protection.

For the stone surfaces, I made a decision to go along with a layered dry-brushing method utilizing primary acrylic paints. The darker grey stone colours went on first to emphasise the depth of all of the little nooks and crannies. I progressively painted with lighter and lighter layers, with gentle brush strokes, to emphasise the highlights and outcroppings on the tower. I additionally went again and used a small mottling brush with grey and black on it to present the stones a greater trying texture; the ‘bricks’ have been left alone with simply the bottom coat.

By slowly making use of paint layers, the phantasm of stone and masonry will seem. If I had began with a totally clean texture, I’d have needed to both draw or etch the mortar traces, which might take the portray therapy in a wholly totally different route, and the depth impact wouldn’t be as cool.

One of many particulars I needed to emphasise are the smaller stone trim particulars which are darker than the remainder of the outside as a result of their surfaces are flat in relation to the solar. They choose up all of the sunshine, moisture, mud, and particles which ‘cook dinner’ in layers and turn into darker than the remainder of the outside over time on actual stone.

For the doorway and the steps, I made a decision to make use of some earthy and woody grey/browns on the brink, in addition to some very gentle greens to spotlight ‘moss’ and ‘algae’ on the steps, and as vegetation rising across the base of the tower.

Now for the explanation I printed the tower with clear orange filament! I took benefit of the void underneath the underside of the steps contained in the print and determined so as to add a lighting impact. I cannibalized a battery-operated tea gentle and drilled a gap to suit contained in the void  so as to add some dungeon atmosphere. When the lights are low, it provides a extremely cool impact to the tower!

For extra recommendations on learn how to end your 3D prints, head over to this educational video the place Alec and Invoice from Punished Props present you learn how to end your prints utilizing sanding, filling and portray:

https://www.youtube.com/watch?v=eGrRKdy6x7I

If you’re seeking to be taught extra about utilizing a extra chemical-based method to ending, (I didn’t use this technique on this undertaking, however you may!) you may take a look at this MatterHackers information with Alec: he exhibits you learn how to end a print utilizing XTC-3D Excessive-Efficiency 3D Print Coating:

https://www.youtube.com/watch?v=ChkHuFU90WE

I hope you loved this How To article on creating an superior stone-like facade on a 3D printed tower. Bear in mind, you may all the time choose totally different colours and textures and add-ons to make the tower actually your individual. Thanks for studying! Now exit and make one thing!

Do you will have a suggestion for a weekend construct? Tell us within the feedback beneath or at MatterHackers.com!