Potensic Atom SE Firmware Replace – Droneblog


The Potensic Atom SE is an entry-level funds drone able to 4K filming and weighing beneath 250 grams.

How will we run a firmware replace for the Potensic Atom SE drone?

You need to open the PotensicPro app whereas the drone and distant controllers are powered on and linked. When new updates are rolled out, you need to obtain them from the principle display, then set up them from the firmware replace menu.

I’ll enable you to replace your Atom SE firmware in at present’s article with a fast information. Let’s get began!

Why are firmware updates crucial for the Potensic Atom SE?

Firmware updates are important processes that enhance a drone’s efficiency and performance, together with the Potensic Atom SE.

From prolonged vary, improved digital camera, stability, smoother flight, and new or better-assisted features, the firmware updates’ function is to boost these processes, repair present bugs, and even launch new operations.

That’s why it’s essential to carry out firmware updates when requested, not solely with the Atom SE however any drone.

The drone and the distant controller will need to have the identical firmware (updated) for the drone to operate correctly and keep away from any incompatibilities. 

How lengthy does it take the Potensic Atom SE to replace its firmware?

A firmware replace takes about 8 to 10 minutes for the Potensic Atom SE. That features obtain time and set up.

Generally it takes extra, many occasions much less, relying on the replace measurement, if there are extra updates within the queue, your Wi-Fi or web connection, and your cellular gadget.

You may carry out a number of firmware updates with one firmware obtain. It might be launched as particular person updates or in packs. 

Energy on the drone and distant controller to test for updates earlier than leaving the home, or chances are you’ll end up within the discipline attempting to do firmware updates.

This takes time and cellular information and can drain from the battery, lowering your flight time.

Tips on how to replace the Potensic Atom SE’s firmware

Earlier than we start, you need to have the PotensicPro app in your cellular gadget (Android or iOS), which is the app you want to fly the Atom SE and replace the firmware. 

Guarantee your drone is linked to the distant controller and you’ve got carried out the binding and setup course of, which is required earlier than the primary use when purchased as new.

Then comply with these steps.

  1. Energy on the drone after which the distant controller.
  2. Begin the app. If the drone and distant controller are on and related, it’s best to get a notification with a firmware replace on the principle display, which you need to obtain, because it gained’t allow you to skip this half.
  3. The downloading course of might take a couple of minutes, and you can not use the app throughout this time. 
  4. As soon as the obtain is full, you need to use the app, however beware that the firmware replace is just downloaded and has not been put in.
  5. Go to the principle PotensicPro app display to put in and enter stay view mode. 
  6. Faucet the three dots on the highest proper nook (whereas in Reside View mode) and navigate to the three small dots on the backside left of the menu. 
  7. Right here you will notice small blue bins with firmware updates for every gadget. Generally, the firmware updates are put in routinely; if not, you can see them there.
  8. Tapping on the replace will present you the modifications within the new model. You may set up it from there.
  9. Guarantee you will have sufficient battery in your drone and distant controller, and DO NOT MOVE the drone whereas the firmware updates are put in.
  10. Proceed with all of the firmware updates to replace your Atom SE and equipment.
  11. After finishing all of the firmware updates, please flip off the drone and the distant controller (it doesn’t matter the order) after which flip them again on for the updates to be totally energetic. 

» MORE: Potensic Atom SE Drone Evaluation

How typically is Potensic Atom SE firmware up to date?

There is no such thing as a particular timeframe for when Potensic Atom SE firmware updates will likely be rolled out. All of it will depend on the emergency of fixing bugs or including new options.

Typically, firmware updates are launched at the very least as soon as each few weeks, however it may be extra typically. These might be micro or main updates.

Please make sure that you carry out these updates from the PotensicPro app just for the Atom SE, as there are extra Potensic apps, such because the Potensic-G, which is appropriate with totally different drones.

What are the circumstances for putting in the Potensic Atom SE firmware replace?

  • You need to guarantee at the very least 30 % battery on the drone and distant controller. It’s advisable to have extra, simply in case important updates take longer to put in.
  • Your cell phone should be related to the web, both cellular information or Wi-Fi, to obtain the firmware on the app.
  • When putting in the firmware replace, don’t transfer the drone in any respect. Place the drone on a degree floor.
  • Don’t interrupt the improve course of, or the replace will fail.

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest Articles